English
Spanish
French
The LT HQ.JCX-130 is a CNC busduct joint-connection busbar machine for BBT busbar trunking systems. It carries out punching, stretching, bulging and cutting on 5 x 130 mm busbar at 200 kN nominal pressure, holding hole-to-hole distance to better than 0.1 mm. Busbar is clamped once and the machine switches clamps automatically, so no manual re-feeding is needed.
HQ.JCX-130 CNC Busduct joint connection busbar of BBT trunking system machinePro
Hole accuracy at working rate — On 5 x 130 mm busduct joint busbar, the hydraulic striking head runs at 200 kN nominal pressure with a 30 mm cylinder trip at 60 strikes per minute, and holds the distance between holes to better than 0.1 mm at that full rate, so the tolerance is not bought by slowing the cycle down.
Axis positioning — The X axis positions at up to 50 m/min on a high-precision ball screw and linear guide. Against a manual stop-and-clamp sequence on the same joint, the automatic clamp switching removes the repeated handling steps between hits, which raises the finished-part rate and cuts scrap.
Automation of the cycle — Raw material is clamped once and the machine repeats clamp switching without operator intervention, so one operator can run the joint line. Parameters are entered on a touch-screen man-machine interface. Machine size is 3600 x 1000 x 1500 mm.
HQ.JCX-130 CNC Busduct joint connection busbar of BBT trunking system machine
Product
CNC Copper Busbar Busduct joint connection Machine
Serial
MX.JCX-130
Main Function:
Busduct joint connection busbar of BBT trunking system
Main Feature:
MX.JCX-130 CNC Copper Busbar bus duct disconnect switch machine CNC Bus dust connection joint bus bar processing center belongs to a new generation of processing equipment of our company that is independent researched and developed by ourselves. The main use is processing production of bus dust connection bus bar , including punching, stretching, bulging, cutting and other processing technology.
1.The main use is processing production of bus dust connection bus bar , including punching, stretching, bulging, cutting and other processing technology automatically.
2.raw materials can be realized that clamped once, without manual intervention in the process,automatic repeat switching clamp, remaining less waste, higher rate of finished products and high degree of automation.
3.The main striking head of this machine is using hydraulic work way, with the advantages of pressure strong, performance stable, the security high etc.
4.Bus bar adopts hydraulic clamp to clamp, force strong, stability high.
5.The Busway Switches machine machine adopts the man-machine interface (touch screen) dialogue, when working , simply set the relevant parameters, can be convenient to connect various technological busbar processing, has the advantages of simple operation, low requirement for the operator etc.
6.this machine adopts the transmission mode of high precision ball screw , high precision linear guide rail with the advantages of high efficiency, low energy consumption, high stability and so on.
Tech Paramete:
Nominal Pressure - 200KN
The max position speed of X axis: 50m/min
The trip for striking cylinder: 30mm
Frequency of striking: 60 Times/min
Accuracy of the distances of the holes: ＜±0.1mm
Machining Range: 5×130 mm
Overall size: 3600×1000×1500 mm
Weight: 1300kg
Video:
